Most Joker coats are polyester approximations that read as costume the moment they are photographed. Baron builds this coat in 100% Melton wool, to your measurements, with canvas front construction, triple rear vents, and the five-button flared cuffs that are screen-accurate to The Dark Knight. The orange acetate lining is inside, visible only when you open the coat. We send a free test coat first so you can confirm the cuff position and shoulder line before we cut the final Melton wool.
Joker Trench Coat, Dark Knight Inspired in Purple Melton Wool
$699.00
Men’s Measurement Guide
Follow these simple steps to ensure your custom garment fits you perfectly. All you need is a flexible measuring tape.
I
Jacket Measurements
Suits, Blazers, Shirts, Vests & Coats
Desired Jacket (Garment) Length
Shoulder to Hem
- Stand straight in a natural posture with your arms relaxed at your sides.
- Start measuring from the top of your shoulder, right next to the base of your neck.
- Measure straight down along the front of your body to where you want the jacket to end.
- Keep the tape straight and do not curve it around the body.
Neck Circumference
- Stand straight and look forward in a relaxed position.
- Wrap the measuring tape around the base of your neck where a shirt collar would naturally sit.
- Keep the tape level all the way around.
- For comfort, leave space for one finger between the tape and your neck.
Shoulder Width
Across the Back
- Stand naturally with shoulders relaxed — do not pull them back.
- Measure from the edge of one shoulder to the edge of the other shoulder across your back.
- Follow the natural curve of the shoulders for an accurate measurement.
- Keep the tape flat and do not measure too high near the neck.
Desired Sleeve Length
- Stand straight with your arm relaxed in a natural posture.
- Start measuring from the edge of your shoulder where the sleeve seam would sit.
- Measure down your arm to where you want the sleeve to end.
- Keep the tape following the outside of the arm and avoid bending the elbow.
Chest Circumference
- Stand up straight with your arms relaxed at your sides.
- Wrap the measuring tape around the fullest part of your chest, typically right under your armpits.
- Keep the tape parallel to the floor.
- The tape should be snug but not tight enough to restrict breathing.
Stomach Circumference
- Stand up straight with your arms relaxed at your sides.
- Wrap the tape around the fullest part of your stomach — usually above the waistband and around the belly button area.
- Keep the tape parallel to the floor.
- Hold snug but do not compress the skin.
Hip Circumference
- Stand with your feet together and your body relaxed.
- Wrap the measuring tape around the widest part of your hips and seat.
- Keep the tape level and parallel to the floor all the way around.
- The tape should be snug, allowing room for one finger for comfort.
Wrist Circumference
- Relax your arm and keep your hand in a natural position.
- Wrap the measuring tape around your wrist bone — where a watch would sit.
- Keep the tape snug but not tight.
- Leave room for one finger between the tape and your wrist for comfort.
Trouser Measurements
II
Trouser Measurements
Trousers, Dress Pants & Shorts
Trouser Length
Waistband to Hem
- Stand straight wearing a well-fitting trouser or in a natural posture.
- Start from the top of your waistband where you normally wear your trousers.
- Measure down the outside of your leg to your desired trouser hem length.
- Keep the tape straight and do not measure diagonally.
Trouser Waist
Where Your Trousers Sit
- Identify the exact position where you normally wear your trouser waistband — typically just below your navel.
- Measure around your bare waist at this exact point, keeping the tape level and parallel to the floor.
- Stand in a relaxed, natural posture. Do not suck in or push out your stomach.
- The tape should be snug but not tight — you should be able to place one finger between the tape and your body.
Hip Circumference
- Stand with your feet together and your body relaxed.
- Wrap the measuring tape around the widest part of your hips and seat.
- Keep the tape level and parallel to the floor all the way around.
- The tape should be snug, allowing room for one finger for comfort.
Thigh Circumference
- Stand with your feet slightly apart and your weight evenly balanced.
- Start at the top of your inseam, near the crotch area.
- Wrap the tape around the fullest part of your thigh.
- Keep the tape snug with room for one finger to avoid measuring too tight.
Trouser Leg Opening
Hem Width
- Lay a well-fitting pair of trousers flat on a table or smooth surface.
- Smooth out the fabric so there are no wrinkles at the hem.
- Measure straight across the bottom hem from one edge to the other (flat width).
- Do not measure around the full opening — this measurement is taken flat across.
Rise
Crotch to Crotch
- Stand straight in a relaxed posture.
- Start measuring from the back waistband where you normally wear your trousers.
- Bring the tape between your legs and up to the front waistband.
- Keep the tape close to the body for an accurate rise measurement, without pulling it too tight.
Ask a Question
Any Questions about this product? Please feel free to ask.
Description
The Joker Trench Coat: Every Other Version Is a Costume. This Is the Coat.
The Dark Knight was released in 2008. Heath Ledger’s performance won the Academy Award posthumously. The coat he wore in that film, the deep purple Melton wool trench with wide peak lapels, flared cuffs, and a flash of orange lining, has never gone out of demand. It is the most studied villain costume in modern cinema and the most searched cinematic coat in the cosplay community, year after year.
The problem is that almost every version available is a costume. Polyester fabric with a sheen that reads as cheap under any light. Generic sizing with cuffs that land at the wrong point on the arm. A single vent in the back that makes the coat hang stiffly instead of flowing when you move. You can tell immediately, in a photograph, which version someone is wearing. The coat communicates something specific about the character. A bad replica communicates that you are wearing a Halloween accessory.
Baron builds this coat in 100% Melton wool, to your measurements, with canvas front construction, triple rear vents, five working cloth-covered buttons on the flared cuffs, and the orange acetate lining that is hidden inside until you open the coat. Before we cut the final Melton wool, we send you a free test coat. You confirm every measurement, including where the cuffs sit on your wrist. Then we build the real thing.
Real Customer: The Test Coat Before the Melton Wool
Below are photographs from a customer fitting their free test coat. This is what the process looks like in practice. The test coat is built in cotton to the customer’s exact measurements and ships before a thread of the final Melton wool is cut. Every element of the final coat is present in the test, including the flared cuff stance, the peak lapels, and the coat length.
This is what the difference between “the right fit” and “approximately right” looks like on a coat of this silhouette. The flared cuffs, the shoulder line, the way the coat hangs from the peak lapels, all of it depends on the measurements being correct before the final cloth is touched.
Free Test Coat: The Cuffs Have to Land in the Right Place
The flared cuffs on this coat are one of its most distinctive features. They widen from the sleeve and fasten with five working cloth-covered buttons in a spaced stance. When the fit is right, they sit correctly on the wrist and flare outward. When the sleeve length is off by even a small amount, the cuffs sit too high or pool at the hand, and the entire silhouette of the coat changes. You cannot correct this with a safety pin. It has to be right in the pattern.
Before we cut your final coat in Melton wool, we build a complete test coat in cotton to your measurements, the full pattern including lapels, cuffs, back vents, and coat length, and ship it via trackable courier. You try it on. You check the shoulder line, the lapel roll, the cuff position, the coat hem length. You send us your notes. We apply every correction to the final pattern. The test coat is yours to keep.
This is how a screen-accurate coat gets made correctly for a real body. The silhouette must be exact. A fraction off ruins the reference.
Who This Coat Is For
The Serious Cosplayer Who Has Worn a Bad Version
You have owned a cheaper Joker coat. You know exactly what was wrong with it. The fabric shone under convention lighting. The cuffs sat at the wrong point. The back was stiff because there was only one vent. You could see the compromise in every photograph. You want the version where there is nothing to compromise. This is that version.
The Collector Who Wants the Coat, Not the Costume
You are not building a full Halloween outfit. You want the coat itself, built correctly in real wool, as an object worth owning. A bespoke Melton wool coat with canvas front construction, fitted to your measurements, with the specific construction details that make it screen-accurate. This is the coat as a collector piece, not as a seasonal accessory.
The Detail Researcher
You know about the triple rear vents. You know the cuffs have five buttons in a spaced stance, not grouped. You know the lapels are wide peak, not notch. You know the original coat was Melton wool. You have been looking for a version that gets all of this right. Baron builds from the screen-accurate pattern. We know the same details you do.
The Fashion Buyer Who Found the Silhouette
You came to this coat through fashion, not through the film. The long purple wool coat with wide peak lapels is a statement piece that works in editorial, theatrical, and formal contexts that have nothing to do with cosplay. Worn without face paint, in any of the 15 Melton wool colors, this coat is dramatic outerwear that reads as intentional and collector-quality. The orange lining is yours to know about.
How Your Joker Coat Is Made
1
Choose your Melton wool color and lining, enter your measurements
Select from 15 Melton wool colors (purple is screen-accurate default) and 33 acetate lining colors. Enter your measurements on the product page. No emails, no back-and-forth.
Select from 15 Melton wool colors (purple is screen-accurate default) and 33 acetate lining colors. Enter your measurements on the product page. No emails, no back-and-forth.
2
We build and send your free test coat
A complete test coat in cotton, the full pattern including lapels, flared cuffs, triple vents, and coat length, is made to your measurements and shipped via trackable courier.
A complete test coat in cotton, the full pattern including lapels, flared cuffs, triple vents, and coat length, is made to your measurements and shipped via trackable courier.
3
You try it and give us your notes
Check the shoulder line, lapel positioning, cuff stance, and coat hem. The cuff position especially needs to be confirmed. Most clients send two to four adjustment notes.
Check the shoulder line, lapel positioning, cuff stance, and coat hem. The cuff position especially needs to be confirmed. Most clients send two to four adjustment notes.
4
We build your final coat
Every adjustment is applied to the pattern. The Melton wool coat is cut and sewn with canvas front, hand-finished buttonholes, hand-stitched armholes, pick-stitched details, and orange acetate lining throughout.
Every adjustment is applied to the pattern. The Melton wool coat is cut and sewn with canvas front, hand-finished buttonholes, hand-stitched armholes, pick-stitched details, and orange acetate lining throughout.
5
Your coat ships worldwide
The finished coat ships via trackable courier. The test coat is already yours, no return needed.
The finished coat ships via trackable courier. The test coat is already yours, no return needed.
6
We answer if anything needs attention
We are reachable by email and we reply. Our customers come back because the fit is right and we answer emails. Every coat is made by a tailor whose name we know.
We are reachable by email and we reply. Our customers come back because the fit is right and we answer emails. Every coat is made by a tailor whose name we know.
Fabric: 15 Melton wool colors Lining: 33 acetate colors Care: Dry clean only
Full Specification
| Fabric | 100% Melton wool, 15 colors available |
| Default color | Purple Melton wool |
| Coat construction | Canvas front |
| Coat style | Single-breasted, mid-calf length |
| Lapels | Wide peak lapels, hand pick-stitched |
| Front fastening | 4 standard or cloth-covered hidden buttons |
| Chest pockets | Welt chest pockets |
| Hip pockets | Horizontal hip pockets with flap |
| Interior pockets | Three |
| Back vents | Triple rear vents |
| Coat hem | Straight front hem |
| Shoulder construction | Hand-stitched minimal shoulder pads |
| Armholes | Hand-stitched |
| Sleeve cuffs | Flared cuffs, 5 working cloth-covered or standard buttons, spaced stance |
| Buttonholes | Hand-finished buttonholes throughout |
| Buttons | Cloth-covered or standard buttons, stitched and reinforced by hand |
| Lining | Orange acetate (default), 33 colors available |
| Seam allowances | Ample throughout for future alteration |
| Care | Dry clean only |
The Coat vs. The Costume
| Off the Rack | Baron Boutique | |
|---|---|---|
| Fabric | Polyester or cotton blend, shiny under lighting, reads as costume | 100% Melton wool, matte, structured, reads as a real coat |
| Fit | Generic sizing, cuffs at wrong position, coat length approximate | Built to your measurements, confirmed through the free test coat |
| Fit guarantee | None, size charts only | Free test coat shipped to you before final Melton wool is cut |
| Construction | Fused or unstructured, collapses after repeated wear | Canvas front, holds structure through years of convention wear |
| Rear vents | Single vent or no vents, coat hangs stiffly | Triple rear vents, coat flows and moves correctly |
| Cuffs | Machine-stitched, non-functional buttons | Flared cuffs with 5 working cloth-covered buttons, spaced stance |
| Buttonholes | Machine-cut | Hand-finished buttonholes throughout |
| Lining | Generic black or plain colored lining | Orange acetate lining, 33 colors available |
| Color options | Purple only, usually | 15 Melton wool colors at the same price |
About Baron Boutique
Baron Boutique has been building custom garments by hand for over 25 years. Specializing in bespoke luxury tailoring, cinematic-inspired fashion, statement outerwear, handcrafted cashmere, and custom formalwear for both men and women. The brand is rooted in artisanal craftsmanship and dramatic design. From silk suits and frock coats to handloomed cashmere shawls and scarves, every piece is created with individuality, precision, and collector-quality craftsmanship inspired by historical elegance, fantasy, and cinematic storytelling.
Our customers come back because the fit is right and we answer emails. Every garment is made by a human tailor whose name we know.
Questions About the Joker Trench Coat
Why Melton wool and not leather or polyester like other sellers?
The screen-used coat from The Dark Knight was made in wool, not leather or polyester. Melton wool is a dense, tightly woven fabric with a smooth, matte surface, no sheen, no synthetic gloss. It drapes with weight, holds its shape, and does not look like a costume under convention lighting or in photographs. Polyester versions are less expensive to produce but they reflect light differently and read as costume rather than as a tailored coat. Leather versions exist but they change the silhouette and are significantly less comfortable for extended wear. Melton wool is the correct material.
Why does the coat have three vents in the back?
The triple vent configuration is screen-accurate to the coat worn in The Dark Knight. It also has a practical function: three vents allow the coat to flow and open when you move, which is what gives the coat its dramatic silhouette in motion. A single vent or no vents make the coat hang stiffly from the hips, which looks wrong in photographs and feels restrictive to wear. Most generic versions cut this detail because it requires more pattern work. We include it because it is what makes the coat move correctly.
What is the canvas front and why does it matter for this coat?
A canvas front is a layer of woven horsehair canvas hand-stitched into the chest and front of the coat between the outer fabric and the lining. Unlike a fused interlining which is glued in, the canvas floats and gradually molds to your chest over time. In a long coat with wide peak lapels like this one, the canvas front is what keeps the lapels rolling correctly and the coat front holding its shape after multiple conventions and dry cleans. A fused coat loses its shape. A canvas-front coat improves with wear.
Can I order this coat in a color other than purple?
Yes. The 15 Melton wool colors include purple, black, charcoal, dark grey, grey, light grey, navy, cobalt, teal, turquoise, burgundy red, camel, light brown, aubergine, and gold yellow. All are the same price. Purple is correct for a screen-accurate Dark Knight replica. The other colors work well for a Joker-inspired coat in a different colorway, or for wearing the coat as fashion outerwear where you want the silhouette without the direct film reference.
The orange lining is inside the coat. Can I choose a different lining color?
Yes. Orange acetate is the default lining and the screen-accurate choice. The inside of the coat is the detail that only the wearer knows about, which is entirely right for the character. If you want a different lining, 33 acetate lining colors are available at no extra charge. The lining selection is part of the product page order form.
How does the free test coat process work?
You enter your measurements on the product page when you order. We build a complete test coat in cotton to your measurements, the full pattern including lapels, flared cuffs, triple vents, and coat length, and ship it to you via trackable courier. You try it on and send us your notes, particularly the shoulder line, lapel roll, and cuff position. We apply every correction to the final pattern before cutting the Melton wool. The test coat is yours to keep. No return required.
How long does the full process take?
Allow 6 to 9 weeks from order to final coat. The test coat takes 2 to 3 weeks to build and ship. Once you confirm fit, the final coat takes 4 to 6 weeks in production. If you have a convention date or specific deadline, tell us when you order and we will confirm whether the timeline is workable.
Can I wear this coat outside of cosplay?
Yes, and many of our customers do. In any of the 15 Melton wool colors, the long coat with wide peak lapels reads as dramatic statement outerwear to anyone who does not know the film reference. In black or charcoal, it works for theatrical events, formal occasions, and editorial contexts. In purple, it is unmistakably specific, which is its own kind of statement. The construction quality, seam allowances, and Melton wool hold up across years of wear beyond any single event.
Do you ship internationally?
Yes. Both the test coat and the final coat ship worldwide via trackable courier. Delivery times vary by destination.
4 reviews for Joker Trench Coat, Dark Knight Inspired in Purple Melton Wool
You must be logged in to post a review.
You may also like…
$929.00The coat that made a generation of fantasy film fans fall in love with British tweed. Every version we make is hand-tailored to your measurements in authentic herringbone tweed, finished with dark leather accents on the pocket flaps, sleeves, and collar, just as inspired by the screen. Before we cut the cloth, we send you a complimentary cotton test coat to try on at home. You confirm the fit, we make any needed adjustments, and only then do we craft the final coat. Worldwide tracked shipping. Typical production time: 4–6 weeks.
-
New$699.00
Most purple Joker pieces on the market are the long overcoat. This is not that. This is the formal evening tailcoat — double-breasted look, wide peak lapels, theatrical tails, tuxedo-inspired construction — the Nicholson look at its most dramatic. Hand-tailored in purple wool blend to your exact measurements, with a free cotton test tailcoat before we cut the real fabric. Canvas front, purple acetate lining, fabric-covered sleeve buttons. Tracked worldwide shipping. Typical production time 4 to 6 weeks.
- (1) $699.00
A faithful recreation of Jack Nicholson’s legendary purple suit coat from Batman 1989. Handcrafted with screen-accurate tailoring, this Joker replica embodies Gotham’s most unforgettable villain—designed for collectors, cosplayers, and those who live the legend.
This meticulously crafted Joker overcoat brings cinematic magic into your wardrobe, honoring every detail of the original Batman 1989 costume worn in one of cinema’s most celebrated performances.
Select options This product has multiple variants. The options may be chosen on the product page - (1) $899.00
The Dark Knight Joker coat in full-grain leather — for buyers who want the silhouette permanently, not just for one convention. Cow Nappa holds the wide peak lapels and flared cuffs in shape without internal support, and lasts decades rather than seasons. Because leather cannot be corrected after cutting, we send a free cotton test coat first so every measurement is confirmed before any leather is touched. The same pattern, the same construction, the permanent version.
Select options This product has multiple variants. The options may be chosen on the product page - (2) $839.00
Arthur Fleck’s iconic Joker suit from the unforgettable 2019 staircase scene, tailored in rich burgundy Melton wool with a striking gold waistcoat. Custom-made to your exact measurements, every order includes a free test suit first. You approve the fit. Then we cut the final garment. This is not a costume, but a refined, wearable interpretation of Joaquin Phoenix’s legendary look for everyday style.
Select options This product has multiple variants. The options may be chosen on the product page
Related products
- (1) $599.00
Bloodborne Hunter coat for cosplayers seeking a daring and inspirational look. With six-show buttons and a uniquely tailored wide lapel collar, the Hunter coat is for avid Bloodborne fans to enhance personality. A beautifully designed double-layered Hunter cosplay coat is an exceptional value for money.
Select options This product has multiple variants. The options may be chosen on the product page - $599.00
Allan Quatermain character played by Sean Connery in the movie League of Extraordinary Gentlemen. The Allan Quatermain long coat is not only for collection but can be worn in everyday life. The Sean Connery long coat is very classy and adds charm and personality. The long coat brings out a great look for any cosplayers.
Select options This product has multiple variants. The options may be chosen on the product page - (1) $419.00
Second Doctor coat replica in black offers a timeless appeal with the classic Whovian style that works as a casual and cosplay outfit. The second Doctor costume is unique as it has big pockets and a frock coat-style design. 2nd Doctor cosplay coat in a comfortably loose fit lets you move freely. Patrick Troughton’s coat is an awesome combination of comfort and style.
Select options This product has multiple variants. The options may be chosen on the product page - $699.00
Add life to your look with a splash of styles with this James Bond Skyfall grey suit. This is the timeless James Bond grey suit with utmost confidence. The custom-made Daniel Craig Skyfall grey suit fits perfectly and distinguished the class no matter what the occasion is.
Select options This product has multiple variants. The options may be chosen on the product page - (2) $699.00
Most Matrix coat sellers deliver a polyester approximation in a generic size. The sheen is wrong, the length is approximate, and the silhouette collapses the moment you raise an arm. Baron builds the Matrix Reloaded Neo coat to your body measurements, with the screen-inspired construction that makes the below-ankle silhouette work. We send a free test coat first. You approve the fit. Then we cut the final.
Select options This product has multiple variants. The options may be chosen on the product page - $499.00
Our silk Nehru jacket is a classic. James Bond Nehru jacket designed for the stylish gentleman. A classic cut with a wonderful nubby silk fabric fits like a glove. It’s also perfect for informal occasions like casual weddings and weekend parties. Silk Nehru jackets like the ones in James Bond are an iconic staple from the 1960s. The Dr. No silk Nehru jacket fits over your shirt and is cut to be slim fitting. Its iconic look is designed with a mandarin collar and ventless back. Baron Boutique takes this classic design and turns into a slim-fitting look that can be worn on any occasion.
Select options This product has multiple variants. The options may be chosen on the product page - (1) $1,299.00
Embody the measured elegance and formidable power of a Sith Lord. This is the definitive, screen-accurate replica of Count Dooku’s attire, meticulously custom-tailored to be a masterpiece of cosplay craftsmanship. Every detail is engineered to create a statement of sophisticated menace, making it the ultimate tribute to the iconic character.
Select options This product has multiple variants. The options may be chosen on the product page - (1) $1,379.00
When it comes to cosplay, there is nothing like the shadow costume. A custom-made shadow coat costume features a full-length coat and cape, matching pants, and a pure silk satin red scarf that can easily stand you out from the rest. An example of impeccable tailoring and 100% screen accuracy costume to cosplay 1994 movie The Shadow starring Alec Baldwin.
Select options This product has multiple variants. The options may be chosen on the product page - $529.00
The matchless suede jacket worn by Daniel Craig as James Bond in the film Spectre is an instant favorite. Featuring in some Morocco scenes the James Bond Craig jacket is ideal for hot weather. A beautifully made Spectre suede jacket with detailed stitching shows it is very well put together.
Select options This product has multiple variants. The options may be chosen on the product page - $429.00
Remarkable time traveler 1st Doctor black dress coat replica for enthusiastic cosplayers. The first incarnation Doctor black coat is custom-made with screen-accurate details. A well-tailored William Hartnell black dress coat is the hallmark of a Whovian character.
Select options This product has multiple variants. The options may be chosen on the product page - $799.00
A timeless fourth Doctor Baker Horror Of Fang Baker coat is truly an iconic coat essential for your cosplay collection. The Fang Rock coat will not only look amazing but will also stand the test of time. Made from Melton wool this fourth Doctor coat will get you plenty of wear for many years.
Select options This product has multiple variants. The options may be chosen on the product page - (8) $409.00
Channel the clever, scheming spirit of the Seventh Doctor with this iconic utility jacket. Custom-tailored to be a screen-accurate replica, it’s crafted from a lightweight worsted wool, perfect for staying comfortable at conventions. A free test jacket, sent to your home, ensures a perfect, authentic fit.
Select options This product has multiple variants. The options may be chosen on the product page
Outwear Fit Guide
Outerwear Fit Guide
Outerwear fit affects layering and overall shape. Your test garment will show how your custom coat fits through the shoulders, chest, and body. Use this guide to select the fit that best matches your body type and style preference.
Slim Fit
Streamlined from shoulders to hem.
Best for: Those layering over slim garments or seeking a refined, contemporary profile. This fit minimizes bulk.
Standard Fit
Balanced proportions with layering in mind.
Best for: Average builds or classic styles. This fit allows space for layering while maintaining clean lines.
Relaxed Fit
Extra space for comfort and layering.
Best for: Cold-weather wear or broader builds. Ideal for heavy layering and generous movement.
Athletic Fit
Wide shoulders, contoured body.
Best for: Athletically built frames requiring more shoulder width without a baggy waist or hem.
tarensaunders (verified owner) –
very pleasant experience working with Baron Boutique, the final product came out beautifully. a couple small details were missed but it still remains the most accurate coat on the market. I look forward to wearing it for years to come!
Kaleb Haynes (verified owner) –
Don’t hesitate – This IS the most screen accurate Joker coat on the market. The only issue is the orange lining is a bit too matte? But you can send in your own to Baron Boutique or request something a little different than the stock orange lining.
Turn around time is fast, this is the ONLY coat on the market (Even looking at ones of the same price and quality ) that has the accurate back vents and everything lays how it should. The test coat is an amazing feature – Other companies that charge similar prices should take note from Baron.
Matt (verified owner) –
Great Coat!
I just received the coat today. This is definitely the most screen accurate coat that I could find and it is well worth the price. Bear in mind that the process of finally getting the coat does take a bit of time but really I think that time is well used to perfect the sizing and what not for the coat itself. From the materials, to the sizing, to test garment, to any adjustments along the way, you can tell that a lot of effort was put into this and it shows. Very well done.
Errol (verified owner) –
Wonderful coat
I received the coat the other day, and I must say, you guys did a phenomenal job! I can’t thank you enough for your patience and understanding during this whole process. As a customer, it meant so much to me. Whenever I have any projects in the future which require garments, you are the ones I’m going to first! Have a wonderful week.